Treatment Chemicals

RUB FLOCK 100 - High Molecular Flocculent Water Treatment Chemicals
[For Effluent Treatment Plants]

RUB FLOCK 100 is a high molecular weight flocculant of polyacrylamide type. It is used as clarification and filtration agent of river water, waste water and industrial water. It has wide application in process treatment of mining, metal & ceramics. Beside that it is good clarifying agent for waste water of textile, mining, pumlp & paper, steel, metal and chemicals

1. Chemical Structure :

2. Physical Properties :

Test	Properties
Ionic Type	Anionic
Appearance	White
Bulk Density (g/ml)	0.5-0.8
Molecular weight	Approx. 15 to 18 million
pH (0.2%)solu. Indistiiled water	6 to 8
Form	Powder / Viscous Jelly
Solubility	Totally soluble in water
Effective PH Range	3 to 11 (More effective at slightly alkaline)
Flash Point	Above 90" C
Hydrolysis	20 to 30% (Approximately)
Dilution	Fast Flock 60 should be diluted 200 to 300 times with water before application

3. Characteristic :

	RUB FLOCK 100 shows good flocculation effects with a very little dosage.
	Effects are remarkable when pH of suspension shows neutral to alkaline. Flocs formed by RUB FLOCK 100 are large and hard. Hence it gives very the clear suppernant water.
	Flocculated sluged by RUB FLOCK 100 is dewateresed by certifugal decanter or a belt press. Excellent effects on filtring dehydration are obtained.
	Because RUB FLOCK 100 is Viscous Jelly, it is eazy to handle and its storage stability is excellent.

4. Method Of Use :

	Optimum dosage of RUB FLOCK 100 differs depending on the kind of suspension, concentration and pH. Therefore, it should be used after a preliminary lab testing. In general,1gm/ L against suspension is appropriate.
	While preparing stock solution of RUB FLOCK 100a 1% in Jelly form and 0.1% in powder form is appropriate before using 10 times improves treatment effects further.

5. Application :

Treatment of service water

Clarification and filtration of river water and industrial water.

Condensation and dehydration of sludge from industrial water treatment.

Process treatment

Chemical :	1	Sedimentation and condensation of magnesium hydroxide in manufacturing process of magnesium clinker (Mgo).
	2	Clarification of phosphoric acid solution.
Mining :	1	Sedimentation of slimes of copper, zinc, sulfides ores.
	2	Filtration of slimes and coal powder.
Oil :	1	Enhanced oil recovery.
Creamic :	1	Condensation, sedimentation of slurry in wet type cement manufacture.

Waste water treatment

Pulp and paper

Recovery and clarification of white water, steel and metal

Treatment of sewage containing blast furnace dust.

Treatment of sewage from metal plating

Treatment of sewage from acid cleaning of metals

Chemical

Treatment of sewage from red oxide manufacture.

Textile

Treatment of sewage from wool washing

Treatment of sewage from dyeing

Mining

Treatment of sewage from mining process

Treatment of coal washing

6. Packing :

RUB- FLOCK 100 (Jelly form) is supplied in 50/200 kgs. Polydrums.

RUB- FLOCK 100 (powder form) is supplied in 25kg bag.